H-164-OS strut channels are manufactured by a series of forming dies, or rolls, which progressively cold work the strip steel into the desired channel configuration. This method produces a cross section of uniform dimensions within a tolerance of plus or minus 0.015", on outside dimensions. 14 Gauge Channel with Slots 9/16" X 1-1/8" on 2" Centers 13/16" X 1-5/8" wt./100 ft. - 130#

H-179 mini strut channels are manufactured by a series of forming dies, or rolls, which progressively cold work the strip steel into the desired channel configuration. This method produces a cross section of uniform dimensions within a tolerance of plus or minus 0.015", on outside dimensions. 19 Gauge Channel 13/16" X 13/16" wt./100 ft. - 40#

H-164-RS strut channels are manufactured by a series of forming dies, or rolls, which progressively cold work the strip steel into the desired channel configuration. This method produces a cross section of uniform dimensions within a tolerance of plus or minus 0.015", on outside dimensions. 14 Gauge Channel with holes 9/16" on 1-7/8" Centers 13/16" X 1-5/8" wt./100 ft. - 130#

H-134-OS3 strut channels are manufactured by a series of forming dies, or rolls, which progressively cold work the strip steel into the desired channel configuration. This method produces a cross section of uniform dimensions within a tolerance of plus or minus 0.015", on outside dimensions. 14 Gauge Channel with Long Slots 13/32" X 3" on 4" Centers 1-5/8" X 1-5/8" wt./100 ft. - 130#

H-STRUT Cushion Clamps for Pipes are used to reduce noise due to shock and vibration and to eliminate metal to metal contact. Cushion Clamps are manufactured to fit into the standard openings of 1-5/8" channel to support runs of piping where desired, to secure the pipe in place. Our Cushion Clamps feature a unique shoulder stud which is securely fastened to one half of the clamp (available up to 1-3/8 clamp), which eliminates over-tightening and rotation. It has a nylon-insert nut assuring a positive lock. Cushion Clamps come in Zinc Trivalen Chromium finish. Other finishes available upon request. When ordering specify figure number and O.D. size.

H-STRUT Pipe Hold-Down Two-Hole Strut Straps are all manufactured to fit into the standard openings of 1-5/8" channel to support runs of piping where desired, to secure the pipe in place. Pipe Hold-Down Two-Hole Strut Straps come in Electro-Galvanized (EZN) finish. Safety Factor 3.0 Other finishes available upon request. When ordering specify figure number and O.D. size.

H-STRUT Copper Tubing Clamps are all manufactured to fit into the standard openings of 1-5/8" channel to support runs of piping where desired, to secure the pipe in place. Copper Tubing Clamps come in Electro-Galvanized (EZN) finish. Other finishes available upon request. When ordering specify figure number and O.D. size.

H-STRUT Electrical Beam Clamps are designed to secure all H-STRUT 1-5/8" wide channels, or threaded rod, to beams or supports for the purpose of running piping, conduit or tubing. All H-STRUT fittings are manufactured from 1/4" thick carbon steel or cast malleable iron. Rod support for beams with a flange thickness of 1/2" max. Specify model, rod size and finish when ordering. Please contact us for any other clamps you may need.

H-STRUT General Fittings are designed to fit with all H-STRUT 1-5/8" wide channels. All H-STRUT fittings are manufactured from 1/4" thick carbon steel, 1-5/8" wide, all holes are 9/16" diameter, spaced 1-7/8" on center and 13/16" from the end. Wt. 100#/C

H-STRUT General Fittings are designed to fit with all H-STRUT 1-5/8" wide channels. All H-STRUT fittings are manufactured from 1/4" thick carbon steel, 1-5/8" wide, all holes are 9/16" diameter, spaced 1-7/8" on center and 13/16" from the end. Wt. 77#/C

H-STRUT General Fittings are designed to fit with all H-STRUT 1-5/8" wide channels. All H-STRUT fittings are manufactured from 1/4" thick carbon steel, 1-5/8" wide, all holes are 9/16" diameter, spaced 1-7/8" on center and 13/16" from the end. Wt. 37#/C Available angles: 7-1/2° 15° 22-1/2° 30° 37-1/2° 45° 52-1/2°,60° 67-1/2° 75° 82-1/2°

H-STRUT General Fittings are designed to fit with all H-STRUT 1-5/8" wide channels. All H-STRUT fittings are manufactured from 1/4" thick carbon steel, 1-5/8" wide, all holes are 9/16" diameter, spaced 1-7/8" on center and 13/16" from the end. Wt. 70#/C

H-STRUT Grip Lock Nuts With Long Spring are designed with specially formed teeth in the parallel channel recesses to grip the returned lip of the channel. The shearing action of the teeth assures positive locking of the H-STRUT channels to the fittings.

H-STRUT Grip Lock Nuts With Regular Spring are designed with specially formed teeth in the parallel channel recesses to grip the returned lip of the channel. The shearing action of the teeth assures positive locking of the H-STRUT channels to the fittings.

H-STRUT Grip Lock Nuts Without Spring designed with specially formed teeth in the parallel channel recesses to grip the returned lip of the channel. The shearing action of the teeth assures positive locking of the H-STRUT channels to the fittings.

H-STRUT Thread Rods are designed with specially formed teeth in the parallel channel recesses to grip the returned lip of the channel. The shearing action of the teeth assures positive locking of the H-STRUT channels to the fittings.